Dur-o-wal's DA3200 Single Wythe Ladur wire are prefabricated reinforcement products especially designed for embedment in the horizontal mortar joints of masonry. Prefabricated Corners and Tees are also available and measure 32 inches (810mm) x 32 inches (810mm) in a hot dip finish. Available in two types of finishes (galvanized or hot dip), Dur-o-wal Ladur wire is used:
  • To control shrinkage cracking
  • To bond intersection walls
  • To provide principal steel in engineered masonry walls
  • To reinforce stack bond masonry
Dimensions:
  • Out-to-out spacing of deformed side rods is approximately 2 inches (50mm) less than the nominal thickness of the wythe or wall in which the reinforcement is to be placed
  • Ladur is provided in 10 feet lengths (3050mm) with Cross Rods welded 15 inches on center (380mm)
Click here for more product specifications

Please visit Dur-O-Wal for more information.

x©2004 Tileco, Inc.
x91-209 Hanua Street
xKapolei, Hawaii 96707